How do I install my Hay Hoops Feeder?
Our innovative Hay Hoops feeders are available in a few different styles. Choose the style you have below to learn how to properly install, use, and care for your Hay Hoops Feeder.
All Hay Hoop styles must be mounted so that their net, when empty, is at least 12" off of the ground. Only hay nets with openings less than 2" should be used with the Hay Hoops Products.
Mounting the Original Hay Hoop Frame
Step 1
With the small tube at the top, mount the base plate to a flat, permanent wooden surface by placing a screw through the center hole.
Step 2
Once mounted, use a level to check that the base plate is straight.
Step 3
Once level, place screws in the remaining four corner holes of the base plate.
Step 4
Align the locking mechanism directly below the tube at the top of the HayHoops rim.
Step 5
Align the locking mechanism directly below the tube at the top of the HayHoops rim.
Step 6
Align the locking mechanism directly below the tube at the top of the HayHoops rim.
Attaching Net to Frame
Before attaching a hay net to the Hay Hoops Frame ensure you have properly installed the frame per the instructions above.
This style Hay Hoops frame features welded bicycle hoop style hooks for easy and secure net attachment. Remove the top string on your hay bag. Then, you can loop each hay net section into the Hay Hoops hook.
Still need help?
Mounting the Hay Hoop 2 Frame
Step 1
Unscrew frame to prepare to attach hay net.
Step 2
Feed the top loops from the hay net onto the frame. Continuously slide the loops around as you feed them onto the frame.
Step 3
After all loops are attached to frame, screw the frame closed.
Step 4
Place frame against the wall where it is to be installed. Be sure that bottom of the net is at least 12 inches off of the ground for safety.
Step 5
Using a pencil, mark the screw holes for the locking mechanism location.
Step 6
Set down Hay Hoops Frame. Using a power drill or screwdriver with a phillips bit, mount the bracket to the wall with four screws. (Pre-drilling is advised but not necessary)
Step 7
Set down Hay Hoops Frame. Using a power drill or screwdriver with a phillips bit, mount the bracket to the wall with four screws. (Pre-drilling is advised but not necessary)
Step 8
Place mounting brackets through metal loops at the bottom of the frame and attach to wall with screws.
Step 9
Open up the frame and place spacer behind each mounting bracket, then secure to wall with screws.
Step 10
Your Hay Hoops 2 is ready to use! Fill with hay and watch your horse enjoy!
Still Need Help?
Mounting the Hay Hoop XL Frame
Step 1
Mount the base plate to a flat, fixed surface by driving a screw through the top cener hole with a drill.
Step 2
Using a level, check that the Hay Hoops Frame is straight before continuing.
Step 3
Once level, install two additional screws at the pre-drilled locations on the vertical plate.
Step 4
Now, install the other 4 screws at the pre-drilled locations on the horizontal plate.
Step 5
To use, unlatch the frame by compressing the spring loaded top lock and folding the frame down.
Step 6
Fill with desired amount of hay.